energy_model.cppの変更箇所を記載します。

--------------------------
thisPhy->curLoad->powStats.totalTxDuration = (clocktype) 0;
(263) thisPhy->curLoad->powStats.iduration = 0; // by ueda

PowerCosts* loadTable = (PowerCosts*)
--------------------------
GUI_CUMULATIVE_METRIC);
}

(572) node->energyamount = 0; // by ueda
node->energypermit = 0;
---------------------------
thisPhy = node->phyData[phyIndex];

(644) printf( // Debug by ueda
(645) "[ueda]ENERGT_PrintStats - eType: %d energyStats:%d.\n", thisPhy->eType, thisPhy->energyStats); // Debug by ueda

if ((thisPhy->eType != NO_ENERGY_MODEL )&&
---------------------------
volt = thisPhy->powerConsmpTable->voltage;

(652) printf( // Debug by ueda
(653) "[ueda]ENERGT_PrintStats output OK.\n"); // Debug by ueda

sprintf(buf, "Energy consumed (in mWh)in Transmit mode = %.6f",
---------------------------
IO_PrintStat(
node,
"Physical",
"Energy Model",
ANY_DEST,
phyIndex,
buf);

(699) thisPhy->curLoad->powStats.iduration++; // by ueda

now = (double)
((double)getSimTime(node)/(double)SECOND);
--------------------------
((double)thisPhy->curLoad->powStats.totalTxDuration / (double)SECOND);

(707) printf("iduration=%d, powStats.totalTxDuration=%d\n", thisPhy->curLoad->powStats.iduration, thisPhy->curLoad->powStats.totalTxDuration); // by ueda

sprintf(buf, "Percentage of time in Transmit mode = %f",
--------------------------
duration = (double)
((double)thisPhy->curLoad->powStats.totalRxDuration / (double)SECOND);

(722) printf("iduration=%d, powStats.totalRxDuration=%d\n", thisPhy->curLoad->powStats.iduration, thisPhy->curLoad->powStats.totalRxDuration); // by ueda

sprintf(buf, "Percentage of time in Receive mode = %f",
--------------------------
duration = (double)
((double)thisPhy->curLoad->powStats.totalIdleDuration / (double)SECOND);

(737) printf("iduration=%d, powStats.totalIdleDuration=%d\n", thisPhy->curLoad->powStats.iduration, thisPhy->curLoad->powStats.totalIdleDuration); // by ueda

sprintf(buf, "Percentage of time in Idle mode = %f",
--------------------------
((double)thisPhy->curLoad->powStats.totalSleepDuration / (double)SECOND);

(752) printf("iduration=%d, powStats.totalSleepDuration=%d\n", thisPhy->curLoad->powStats.iduration, thisPhy->curLoad->powStats.totalSleepDuration); // by ueda

sprintf(buf, "Percentage of time in Sleep mode = %f",
-------------------------

以上になります。